Italiano
Shopping Cart
Within 24 hours
This programmer configures NMEA 2000 lever sensors type 27.165.xx and similar ones, changing their use.
The programmer can:
1)Set the sensor for: fuel, clear water, grey water, waste water.
2)Give the number to the tanks (1, 2, 3, etc.)
3)Set the tank capacity in litres or as volume.
The programmer retrofits the boat’s NMEA2000 network – using a Micro-C NMEA2000 cable and connecting it to a free slot in the NMEA2000 network – and can be configured without acting on the lever sensor.
To integrate the programmer into the NMEA2000 network, a Micro-C NMEA2000 cable must be used, the connection requires a free slot in the NMEA2000 network.
The programmer can:
1)Set the sensor for: fuel, clear water, grey water, waste water.
2)Give the number to the tanks (1, 2, 3, etc.)
3)Set the tank capacity in litres or as volume.
The programmer retrofits the boat’s NMEA2000 network – using a Micro-C NMEA2000 cable and connecting it to a free slot in the NMEA2000 network – and can be configured without acting on the lever sensor.
To integrate the programmer into the NMEA2000 network, a Micro-C NMEA2000 cable must be used, the connection requires a free slot in the NMEA2000 network.
